LURS® colofermin potassium is a concentrated microfertilizer for foliar feeding in the critical moments of development of field, fruit and berry crops.
*Colofermine is a multicomponent complexing agent (analogue of chelating agents), which consists of various organic compounds, optimally balanced for maximum absorption and plant uptake (up to 100%) of the corresponding nutrients (main active ingredient) in micronutrient fertilizers.
Depending on the type of micronutrient fertilizers, among other components, colofermin may contain colamine, various complexes of amino acids, micronutrients, including nitrogen, sulfur, sodium in sufficiently high concentrations (up to 280 g/L). Therefore, colofermin also serves as an additional source of plant nutrition.
Due to the above-mentioned factors, our formulations are more effective than the ones, produced by our competitors, even if they have a little higher concentration of an active ingredient.
It does not contain nitrogen, thus making the fertilizer an ideal source of potassium at later stages of plant development.
When there is potassium deficiency chlorosis appears on the leaf tips (so called “marginal leaf burn”), chlorotic areas acquire bronze and dark brown and die off.
LURS® colofermin potassium contains water softener, therefore the use of plant protection products in the hard water (high content of Ca2+ и Mg2+) in conjunction with LURS® colofermin potassium does not reduce their effectiveness. Hardness salts are reliably bound by the formulation component, without causing turbidity of the spraying solution. There is no danger of the calcium sulphate (gypsum) formation, which can lead to breakdown of spraying machinery. When conducting treatments use а freshly mixed solution.
LURS® colofermin potassium has a significant physiological effect on plants, namely:
- increases plant resistance to ground frost;
- reduces affection of crops by root blight and rust;
- improves the flow of water to plant cells;
- reduces evaporation process;
- increases formation of sugars in leaves and their transition to other organs.
Due to its composition the microfertilizer can be applied in a wide range of temperatures, starting from +5° C.
1. INFORMATION FOR CONSUMERS: follow the instructions when using the formulation. The efficacy of the formulation and its ease of use depend on the application, storage and transportation conditions specified by the manufacturer.
2. COMPATIBILITY WITH OTHER FORMULATIONS: the micronutrient fertilizer is applied during the growing season either prophylactically or according to the diagnostics results based on the application regulations. It performs well in tank mixes with plant protection products (unless otherwise specified by the manufacturer of the plant protection products), urea (in the recommended concentrations when using foliar fertilization of agricultural crops according to the crop growth stages), UAN, plant growth regulators, microfertilizers and biological preparations.
Attention! Not recommended for use with plant protection products, based on metals and also with microfertilizers, which have high concentration of metals.
3. PREPARATION OF WORKING TANK SOLUTION:
Warning! Prior to starting preparation of a tank mix, always check the formulations for compatibility!
For this purpose take a container, pour in it some water (which is to be used for the main application), add the tank mix components in proportions, based on the field rates of consumption. After closing the container, mix the contents by shaking it 10-15 times. Evaluate the tank mixture visually twice: immediately after mixing and after the mixture has settled (in about 30 minutes). Incompatibility of formulations is indicated by their separation into layers, residuum occurrence, flocculation of the mixture, formation of sludge that does not disperse.
Attention! It is possible to use the formulation in hard water. The active substances contained in it do not form compounds with hardness salts (СаSO4٠2H2О), hence the solution does not grow turbid.
If there are no compatibility problems, prepare the working solution just before spraying (direct application). Shake the product thoroughly in the original package and pour it directly into the sprayer tank, which is to be previously filled with water to 2/3 of its volume. After this with the mixing mode turned on add the components of the tank mixture in sequence stated in the recommendations and finish the process with filling the tank with water. Stirring of the mixture should be continued throughout the period of its preparation, as well as during application.
Application rates of the spraying solution: field crops — 70-300 L/ha, vegetables — 300-400 L/ha, fruit crops and grapes — 800-1000 L/ha.
4. MIXING ORDER OF SPRAYING SOLUTION COMPONENTS: when preparing the tank mixture, stick to the following sequence of components.
Tank mix
- Water
- Plant growth regulators
- Plant protection products
- LURS® colofermin potassium
- Other micronutrient fertilizers (excluding LURS® sulphur active)
- Water
Tank mix with UAN
- Water
- Plant growth regulators
- UAN according to the foliar application recommendations 3-12%+2,5% MgSO4٠7H2O (5% Decahydrate)
- Plant protection products
- LURS® colofermin potassium
- Other micronutrient fertilizers
- Water
Tank mix with urea
- Water
- Plant growth regulators
- Urea according to the foliar application recommendations using other liquor (either into the sprayer tank or on the filter)
- Plant protection products
- LURS® colofermin potassium
- Other micronutrient fertilizers
- Water
Attention! In preparing a tank mix, care should be taken to ensure that the mixing of the components (such as growth regulators, PPPs, microfertilizers, etc.) is conducted solely in water!
5. APPLICATION REQUIREMENTS: spraying should be done either early in the morning or in the evening, when the humidity level is high to avoid chemical leaf burn. The optimum air temperature is +10…+25 °С (50 — 77 ºF), wind speed up to 5 — 7 m/s depending on the sprayer type. It is not recommended carrying out spraying operations during foggy weather or in the presence of dew, which can lead to surface overflow of the solution and hence the reduction of the treatment efficiency. The spraying should be stopped 1.5 — 2 hours before the rain.
Attention! Use а freshly mixed solution. Do not store the prepared solution more than 24 hours.
6. STORAGE AND TRANSPORTATION:
The formulation should be stored in a warehouse or storage building, designed specifically for this purpose. Storage area should be free of direct sunlight, moisture, pollution and mechanical damage to the container. Store at temperature above 0 ºС below +30 ºС (50 — 86 ºF), in the original closed package in an upright position, with the cap facing up in a cardboard box. Do not stack cardboard boxes more than 3 high.
Formulation viscosity does not decrease at -35 ºС (-31 ºF).
Any form of transport is possible while in covered vehicles. The use of open vehicles, which provide protection against precipitation, is allowed as well.
7. WHO CLASSIFICATION, TOXICITY: 4th toxicity class. The formulation is nontoxic, does not cause allergies, is environmentally friendly and absolutely harmless to pollinating insects.
8. PRECAUTIONS: keep away from children and animals. When carrying out spraying operations, use the appropriate and adjusted equipment, follow generally accepted safety standards.
9. FIRST AID INSTRUCTIONS: if the skin or eyes are contaminated with the preparation, flush them with water. If necessary, call a doctor.
10. CONTAINER AND LEFTOVER FORMULATION DISPOSAL: a container and leftover formulation do not require specific methods of disposal and neutralization.
11. STORAGE PERIOD: 5 years.