VIMPEL® is a complex natural and synthetic formulation with systemic and contact properties for treatment of seeds and plants in the vegetative stage.
THE ROLE OF PLANT STIMULANTS IN PLANT DEVELOPMENT
What are the properties of
VIMPEL®
plant growth stimulator?
GROWTH STIMULANT |
improves and stimulates growth and development of plants |
ADAPTOGEN |
increases adaptability of plants to environmental conditions |
CRYOPROTECTANT |
increases resistance to low temperature and frosts of short duration
|
THERMOPROTECTANT |
increases resistance to high temperature and drought |
ADJUVANT, FILMING AGENT |
enhances efficacy of pesticides and fertilizers
|
DISEASE INHIBITOR |
plants are less subjected to diseases, their immunity is enhanced |
SOIL ACTIVATOR |
enhances development and activity of soil microorganisms |
ANTI-STRESS AGENT |
plants are faster released from stress due to: transplants, treatments with plant protection products, etc.
|
VIMPEL® IS NON-TOXIC, ENVIRONMENTALLY FRIENDLY.
Effect on plants
Steeping of seeds and planting material:
- stimulates the emergence process and seed vigor;
- increases germination;
- promotes active growth of roots and intense acquirement of the vegetative mass;
- protects seeds up to 2 months if they encounter unfavorable conditions in the soil.
Application rates: 30 mL (tubers), 20 mL (other crops) pro 1 L of water
Foliar treatment (before and after flowering):
- increases drought and frost resistance;
- promotes absorption of all types of fertilizers;
- increases fruit weight, improves eating qualities and marketability of products;
- INCREASES PRODUCTIVITY BY 10-30%.
Application rates: 10 – 20 mL pro 10 L of water
Attention:
The formulation performs well with pesticides, growth stimulators, solutions of mineral fertilizers with a wide pH range (that is, those that are used on various types of soils).
Does not crystallize. Storage at low temperatures may result in the product gelling. Increase of ambient temperature causes the increment of the liquid viscosity. The composition of the plant growth stimulator allows conducting treatments at an air temperature above + 5°С.
BEWARE OF COUNTERFEITS!
IN THE SALES OUTLETS
ASK FOR A CERTIFICATE
OF CONFORMITY
1. INFORMATION FOR CONSUMERS: follow the instructions when using the formulation. The efficacy of the formulation and its ease of use depend on the application, storage and transportation conditions specified by the manufacturer.
2. COMPATIBILITY WITH OTHER FORMULATIONS: performs well in tank mixes with plant protection products (unless otherwise specified by the manufacturer of the plant protection products), urea (in the recommended concentrations when using foliar fertilization of agricultural crops according to the crop growth stages), UAN (urea ammonium nitrate solution), microfertilizers and biological preparations.
3. PREPARATION OF WORKING TANK SOLUTION:
Warning! Prior to starting preparation of a tank mix, always check the formulations for compatibility!
For this purpose take a container, pour in it some water (which is to be used for the main application), add the tank mix components in proportions, based on the field rates of consumption. After closing the container, mix the contents by shaking it 10-15 times. Evaluate the tank mixture visually twice: immediately after mixing and after the mixture has settled (in about 30 minutes). Incompatibility of formulations is indicated by their separation into layers, residuum occurrence, flocculation of the mixture, formation of sludge that does not disperse.
Attention! It is possible to use the formulation in hard water. The active substances contained in it do not form compounds with hardness salts. (СаSO4٠2H2О)
If there are no compatibility problems, prepare the working solution just before spraying (direct application). Shake the product thoroughly in the original package and pour it directly into the sprayer tank, which is to be previously filled with water to 2/3 of its volume. After this with the mixing mode turned on add the components of the tank mixture in sequence stated in the recommendations and finish the process with filling the tank with water. Stirring of the mixture should be continued throughout the period of its preparation, as well as during application.
Application rates of the spraying solution: field crops — 70-300 L/ha, vegetables — 300-400 L/ha, fruit crops and grapes — 800-1000 L/ha.
4. MIXING ORDER OF SPRAYING SOLUTION COMPONENTS: when preparing the tank mixture, stick to the following sequence of components.
Tank mix
- Water
- VIMPEL®
- Plant protection products
- Micronutrient fertilizers (excluding LURS® sulphur active)
- Water
Tank mix with UAN
- Water
- VIMPEL®
- UAN according to the foliar application recommendations 3-12%+2,5% MgSO4٠7H2O (5% Decahydrate)
- Plant protection products
- Micronutrient fertilizers
- Water
Tank mix with urea
- Water
- VIMPEL®
- Urea according to the foliar application recommendations using other liquor (either into the sprayer tank or on the filter)
- Plant protection products
- Micronutrient fertilizers
- Water
Attention! In preparing a tank mix, care should be taken to ensure that the mixing of the components (such as growth regulators, PPPs, microfertilizers, etc.) is conducted solely in water!
5. APPLICATION REQUIREMENTS: spraying should be done either early in the morning or in the evening, when the humidity level is high to avoid chemical leaf burn. The optimum air temperature is +5… +25 °С (41 — 77 ºF), wind speed up to 5 — 7 m/s depending on the sprayer type. It is not recommended carrying out spraying operations during foggy weather or in the presence of dew, which can lead to surface overflow of the solution and hence the reduction of the treatment efficiency. The spraying should be stopped 1.5 — 2 hours before the rain.
Attention! Use а freshly mixed solution. Do not store the prepared solution more than 24 hours.
6. STORAGE AND TRANSPORTATION:
The formulation should be stored in a warehouse or storage building, designed specifically for this purpose. Storage area should be free of direct sunlight, moisture, pollution and mechanical damage to the container. Store at temperature above -5 ºС below +40 ºС (23 — 104 ºF).
Attention! Due to the high concentration of the active ingredients, storage at low temperatures (-10 ºС / 14 ºF and below) may result in the product decrease of viscosity and its gelling. Increase of ambient temperature causes the increment of liquid viscosity and the formulation returns to its original state. These processes do not affect in any way the formulation active ingredients and its properties, but the prolonged storage may cause sediment formation. Shake thoroughly before using.
Store in the original closed package in an upright position, with the cap facing up in a cardboard box. Do not stack cardboard boxes more than 3 high.
Any form of transport is possible while in covered vehicles. The use of open vehicles, which provide protection against precipitation, is allowed as well.
7. WHO CLASSIFICATION, TOXICITY: 4th toxicity class. The formulation is nontoxic, does not cause allergies, is environmentally friendly and absolutely harmless to pollinating insects.
8. PRECAUTIONS: keep away from children and animals. When carrying out spraying operations, use the appropriate and adjusted equipment, follow generally accepted safety standards.
9. FIRST AID INSTRUCTIONS: if the skin or eyes are contaminated with the preparation, flush them with water. If necessary, call a doctor.
10. CONTAINER AND LEFTOVER FORMULATION DISPOSAL: a container and leftover formulation do not require specific methods of disposal and neutralization.
11. STORAGE PERIOD: 5 years.