LURS® sulphur active is a high-efficient sulfur micronutrient fertilizer for foliar feeding of potatoes, vegetables (application rate – 30-40 mL pro 10 L water) grapes, berry crops and orchards (application rate – 50-60 mL pro 10 L water).
- highly concentrated micronutrient fertilizer, which eliminates effectively sulfur deficiency in plants;
- does not cause leaf burn, is completely absorbed through the leaf surface of plants;
- increases leaf area by 22%;
- enhances root development and improves plant nutrition;
- contributes to increase of protein and starch content in wheat, oil content in sunflower, soybeans and rapeseed;
- increases disease resistance by 28%.
In which cases it is necessary to apply sulfur?
There is marbling of young leaves, the leave color gradates from yellow to red. Upper leaves are first to experience the deficiency of sulfur.
Which crops require sulfur the most?
- potatoes
- vegetables (cabbage, onion)
| |
Soils with sulfur deficiency and other factors affecting the absorption of sulfur The need in sulfur depends on the level of nitrogenous nutrition: the higher is the level of nitrogen, the more sulfur plants absorb. In the spring, as a rule, sulfur content in the root zone of soil is low, as sulfates are highly mobile.
What to do if there is a lack of sulfur?
To prevent and eliminate the symptoms of a disease, plants should be treated several times with a solution of micronutrient fertilizer LURS® sulphur active.
Compatibility: LURS® sulphur active performs well in tank mixes with herbicides, insecticides, fungicides and biological preparations. Prior to starting preparation of a tank mix, always check the formulations for compatibility.
Attention:
The microfertilizer does not crystallize. Storage at low temperatures may result in the product gelling. Increase of ambient temperature causes the increment of the liquid viscosity. The composition of the microfertilizer allows conducting treatments at an air temperature above + 5°С.
The microfertilizer does not crystallize. Storage at low temperatures may result in the product gelling. Increase of ambient temperature causes the increment of the liquid viscosity. The composition of the microfertilizer allows conducting treatments at an air temperature above + 25°С).
Treatment during the flowering period is not recommended.
The micronutrient fertilizer LURS® sulphur active is not used with formulations that acidify the working solution (pH ≤ 7), due to the formation of hydrogen sulfide.
It is recommended for use in conjunction with
VIMPEL ®plant growth stimulator.
1. INFORMATION FOR CONSUMERS: when applying the micronutrient fertilizer ORAKUL® sulfur active with the formulations, which acidify the aqueous solution (pH≤7), toxic hydrogen sulfide forms, which is firstly dangerous for field staff, and secondly leads to a slight decrease in the concentration of sulfur in the solution.
When mixing microfertilizers with metal-containing formulations (depending on the amount and type of the metal), the formation of a small amount of poorly water-soluble metal sulfides is possible. It should also be noted that finely dispersed sulfur may form sediment before the solution reaches the leaf surface. In this case, keep in mind that the mixing tool should be switched on during spraying.
The best option is to use the formulation ORAKUL® sulfur active and alkaline formulations as well as formulations that do not contain metal atoms simultaneously. In this case, when sprayed on a leaf surface, the aqueous solution containing sulfur microfertilizer begins to form active sulfur intensively and distributes evenly on a leaf surface.
The efficacy of the formulation and its ease of use depend on the application, storage and transportation conditions specified by the manufacturer.
2. COMPATIBILITY WITH OTHER FORMULATIONS: the micronutrient fertilizer is applied during the growing season either prophylactically or according to the diagnostics results based on the application regulations. It performs well in tank mixes with plant growth stimulator VIMPEL 2®. Recommended water temperature for a preparation of the working tank solution is 18 – 20 ºС (64.4 – 68 ºF). The micronutrient fertilizer is compatible as well with the pesticides that do not create an acidic environment in the spraying solution.
3. PREPARATION OF WORKING TANK SOLUTION:
Warning! Prior to starting preparation of a tank mix, always check the formulations for compatibility!
For this purpose take a container, pour in it some water (which is to be used for the main application), add the tank mix components in proportions, based on the field rates of consumption. After closing the container, mix the contents by shaking it 10-15 times. Evaluate the tank mixture visually twice: immediately after mixing and after the mixture has settled (in about 30 minutes). Incompatibility of formulations is indicated by their separation into layers, residuum occurrence, flocculation of the mixture, formation of sludge that does not disperse.
Attention! It is possible to use the formulation in hard water due to the water softener in its composition. At the same time, if there is high concentration of hardness salts and significant amount of water, it is possible that after some time there will be a slight separation of hardness salts in the form of gypsum (СаSO4٠2H2O). In this case, the amount of sulfur in the solution is slightly reduced. These processes in no way affect the solution usability or cause the possibility of spraying equipment failure, as the formulation is finely dispersed. When forming a tank mixture in hard water, we recommend spraying with the mixing mode turned on. After application of the tank mix, it is necessary to rinse the tank with water to prevent the overgrowth of gypsum crystals.
If there are no compatibility problems, prepare the working solution just before spraying (direct application). Shake the product thoroughly in the original package and pour it directly into the sprayer tank, which is to be previously filled with water to 2/3 of its volume. After this with the mixing mode turned on add the components of the tank mixture in sequence stated in the recommendations and finish the process with filling the tank with water. Stirring of the mixture should be continued throughout the period of its preparation, as well as during application.
Application rates of the spraying solution: field crops — 70-300 L/ha, vegetables — 300-400 L/ha, fruit crops and grapes — 800-1000 L/ha.
4. MIXING ORDER OF SPRAYING SOLUTION COMPONENTS: when preparing the tank mixture, stick to the following sequence of components.
Tank mix
- Water
- LURS® sulphur active
- Plant growth regulators
- Plant protection products
- Other micronutrient fertilizers
- Water
Tank mix with UAN
- Water
- LURS® sulphur active
- Plant growth regulators
- UAN according to the foliar application recommendations 3-12%+2,5% MgSO4٠7H2O (5% Decahydrate)
- Plant protection products
- Micronutrient fertilizers
- Water
Tank mix with urea
- Water
- LURS® sulphur active
- Plant growth regulators
- Urea according to the foliar application recommendations using other liquor (either into the sprayer tank or on the filter)
- Plant protection products
- Micronutrient fertilizers
- Water
Attention! In preparing a tank mix, care should be taken to ensure that the mixing of the components (such as growth regulators, PPPs, microfertilizers, etc.) is conducted solely in water!
5. APPLICATION REQUIREMENTS: spraying should be done either early in the morning or in the evening, when the humidity level is high to avoid chemical leaf burn. The optimum air temperature is +10…+25 °С (50 — 77 ºF), wind speed up to 5 — 7 m/s depending on the sprayer type. It is not recommended carrying out spraying operations during foggy weather or in the presence of dew, which can lead to surface overflow of the solution and hence the reduction of the treatment efficiency. The spraying should be stopped 1.5 — 2 hours before the rain.
Attention! Use а freshly mixed solution. Do not store the prepared solution more than 24 hours.
6. STORAGE AND TRANSPORTATION:
The formulation should be stored in a warehouse or storage building, designed specifically for this purpose. Storage area should be free of direct sunlight, moisture, pollution and mechanical damage to the container. Store at temperature above 0 ºС below +30 ºС (50 — 86 ºF), in the original closed package in an upright position, with the cap facing up in a cardboard box. Do not stack cardboard boxes more than 3 high.
Decrease of temperature below -20 ºС (-4 ºF) results in the product decrease of viscosity, the prolonged storage may cause sediment formation.
Any form of transport is possible while in covered vehicles. The use of open vehicles, which provide protection against precipitation, is allowed as well.
7. WHO CLASSIFICATION, TOXICITY: 4th toxicity class. The formulation is nontoxic, does not cause allergies, is environmentally friendly and absolutely harmless to pollinating insects.
8. PRECAUTIONS: keep away from children and animals. When carrying out spraying operations, use the appropriate and adjusted equipment, follow generally accepted safety standards.
9. FIRST AID INSTRUCTIONS: if the skin or eyes are contaminated with the preparation, flush them with water. If necessary, call a doctor.
10. CONTAINER AND LEFTOVER FORMULATION DISPOSAL: a container and leftover formulation do not require specific methods of disposal and neutralization.
11. STORAGE PERIOD: 5 years.
